News

How to lay optical fiber cable in the pipeline

     Optical fiber cables are ubiquitous in our production and life, and cables are laid in many places, including various pipes. Unlike laying on the ground, how should the cable be laid in the pipeline? Optical fiber cable manufacturers to tell you.

     In some cases, the optical fiber cable is required to be protected by a certain mechanical strength or a protective cover, including: cables entering buildings, tunnels, through walls and floors; from the channel to the equipment, poles The outer surface of the wall, the easy access to pedestrians in the house, a section below the ground height of 2 m; the place where mechanical damage may occur.

     The optical fiber cable shall be laid in the pipeline. It shall be ensured that there is no water and debris in the pipeline. When the cable is worn, care should be taken not to damage the protective layer. Corrosive lubricants or lubricating powders may be used as appropriate. Before laying the cable, the cable tube should be unblocked to remove debris. The number of cables that are inserted into the tube should meet the design requirements. The AC single-core cable cannot be penetrated into the steel tube alone.